Thursday, September 18, 2014

Auto-Synced Address Books with Click2Dial for Cisco Finesse

We have been asked many times to enhance the built-in address book gadget in Cisco Finesse, and today, we are proud to announce that we have a solution.

In other words, we believe that 2Ring PHONE SERVICES (IPPS) hosted inside of the 2Ring BROWSER gadget is the best address book solution for Cisco Finesse. Yes, the answer is this simple. To let agents dial the right phone number with just one click (click2dial), to deliver address books that can be personalized and group-managed, and most importantly, to provide a synchronization tool that allows administrators to sync contacts from multiple sources (yes, our tool comes with strong transformation rules), all you need to add is 2Ring PHONE SERVICES (IPPS).

2Ring IPPS can run with 2Ring GADGETS for Cisco Finesse on one virtual machine, and yes, both solutions are pre-approved to co-reside on BE6K and BE7K. This is an ideal add-on for many organizations with Cisco Contact Center Express (UCCX) and Enterprise (UCCE). 

Do you dare to find out more? Make sure to schedule a live demo with one of our demo specialists.

Why one-stop shopping is the best choice for Cisco resellers

Recently I got a shopping list from my wife. I decided to go to the shopping center closest to our office, and I got everything from the list under one roof. I just had to go to the right store/bank/post office to carry out the tasks on the list.

System integrators, more specifically, solution architects, receive similar lists from their customers or prospects. They can find vendors who have only one brick for the house or those who are able to provide multiple bricks at once - as we do here at 2Ring.

We started as a vendor of add-ons for unified communications and built products such as BUSINESS FAX, PHONE SERVICES and CALL ACCOUNTING. To make these solutions even better – user friendly – we built a set of connections between our products. So, for example, your contacts from 2Ring PHONE SERVICES can be used to identify callers in 2Ring CALL ACCOUNTING, or the same contacts can be used to identify fax senders, etc.

Our focus on UC was then expanded to collaboration, and so we built a set of applications for Cisco contact centers: 
And here, we also make sure that our solutions are aware of each other. To give you a few examples, layouts or screen groups built in our WALLBOARDS can be available to agents within the 2Ring BROWSER gadget, supervisors are able to send text messages to WALLBOARDS from our TEAM Gadget, SCRIPTS & advanced wrap-up FORMS communicate with the workflow mechanism (ORCHESTRATOR) that is part of our GADGETS for Cisco Finesse, and the real-time data calculated by our WALLBOARDS can be tightly integrated into the UI of our COMPACT AGENT for Cisco Jabber, so even those users who do not use the full Finesse environment or who do not work from the contact center floor can monitor selected KPIs in the Jabber interface.

Recently we have integrated our solutions for Unified Communication with those for Contact Centers. Your contacts synchronized (from CRM, ..) to our PHONE SERVICES are available directly in Cisco Finesse, including the Click2dial option. And that`s just the beginning. 

There are also other benefits. Our applications are pre-approved to co-reside on BE6K and BE7K, and we approve co-residency of multiple 2Ring solutions on one VM – which will save your customers precious computing power.

Let`s sum up the benefits of our one-stop shopping for your UC/CC projects:
  • solutions that are aware of each other
  • same discount scheme
  • unified pricing where possible
  • affordable product bundles
  • one point of contact for purchase and support
  • savings in computing power

Do not hesitate; visit our “mall” at

Wednesday, September 10, 2014

How to set up a 911 Alert in 2Ring PHONE SERVICES

2Ring PHONE SERVICES is a rich package of services enhancing Cisco Unified Communications Manager (CUCM). 

This blog post focuses on alerting, which comes handy when you or any particular personnel group should be notified about a certain event. Click here for an overview of Alerting delivered by 2Ring PHONE SERVICES.

More specifically, by following the steps described below, you can create a simple alert that will send a text message to a pre-defined security group when someone on the network dials 911.

Note: If you do not have 2Ring PHONE SERVICES available, request a free 60-day trial of the ADVANCED Edition at

1.1 Creation of a Security Group
Create a group of numbers and fill it with numbers/contacts to which the alert should be sent. Such a group has to be created manually; however, once you have a group created, it can be filled manually or automatically from MS Active Directory, a database, a csv file, etc. by using 2Ring's SYNCHRONIZATION Tool. In our fictional scenario, we add contacts manually.

Go to MESSAGING –> Groups of Numbers

The list of existing groups of numbers in 2Ring PHONE SERVICES
Click on Add Number Group.
Enter Name (required) and Description (optional).
Click the Submit button.

Group of Numbers - Detail / Properties
Clicking the Submit button will take you back to the Groups of Numbers page. To assign numbers to the group that you just created, click the Arrows icon in the Action column (see it below in red).

Arrows Icon
On the next page, at the top, in the Number Types section, check the checkboxes for Extension, Jabber, and Mobile, and also check the Include Emails checkbox lower down the screen.

Who should be notified and how?
While holding the Ctrl key, select contacts one by one. When you have selected all the desired numbers, click the  button to add those contacts to the right column called “Numbers Included in the Current Group.” Repeat the process with email addresses to have those added to the “Emails in the Group” column.

Once everything looks good, click the Submit button.

1.2 Creation of an Alert Template
The next step is the definition of an alert template which is nothing more than a group of actions to be carried out when the alert is called. In our case, we will send 1) a text message to IP phones, 2) a chat message to Jabber Clients, 3) email to Security Group members, and 4) even send an SMS to the same Security Group members.

Go to MONITORING –> Alert Templates.

The List of Existing Alerts
Click the Add Template button.
Enter Name (required) and Description (optional but recommended).
Click the Add Action button.
Select Action Type: Text or SMS (the action that sends a text to IP phones and/or to mobile phones).
Fill out the fields From and Destination Group where From could be any text (e.g., 911 ALERT) and Destination group is the Security Group which you created.
Enter the desired alert text into the Text field. You can use proxy symbols in your message. 
We used these three symbols:
[ANI] – calling number (extension that called the 911)
[TIME] – start time of the call
[MAC]  MAC address of the internal device
The list of all proxy symbols is available in the help menu (take your mouse over the question mark near the Text: field). 
Similarly, add actions for email and Jabber messages. You can take inspiration from our example in the screenshot below. When finished, click the Submit button.

And here is our alert template:

Alert Template - Detail
1.3 Creation of a Rule
The definition of an alert template will not do anything itself; it is just a template waiting to be used. The alert template needs to be triggered by an event. In our case, the event will be a call to 911 (in your tests, you can replace 911 with any external or internal number). 

First, we need to configure a corresponding TAPI Observer rule. To do so, go to ADMINISTRATION –> Preferences –> Category: Caller Identification (CLID), Action: TAPI Observer List

TAPI Observer List

Note: We are assuming that you have a fully functional and active TAPI Observer (its configuration is out of the scope of this blog post).

Click  the Pencil icon in the Action column (see above).
On the next page (TAPI Observer Configuration), check the checkbox for Warning when calling specified number (e.g. 911)

TAPI Observer Configuration Settings
Fill out the form:
Phone Number – enter 911
Alert Template – select the alert template you created
Finally click the Submit button to conclude the creation of a simple 911 alert. 

Well done!

Check back later to read more HOW TO blogs in our 2Ring PHONE SERVICES series. If you have suggestions for topics, please let us know in the discussion below. And if you would like to play with this solution, a 60-day free trial of the Advanced Edition is available at